When it comes to modern architecture and robust construction, the safety of your structures relies heavily on the smallest details. At GREMAH, we believe in building the future with quality, innovation, and trust. Our Premium Heavy-Duty Anchor Bolts are specifically engineered to provide unparalleled holding power for your fiber cement boards, exterior grade fiber cement boards, and heavy drywall accessories. Understanding the daily challenges faced by architects, contractors, and builders, we have designed these anchor bolts to eliminate the guesswork from structural fastening. Whether you are anchoring framework for a sophisticated false ceiling or securing heavy exterior wall cladding against high wind loads, GREMAH Anchor Bolts ensure your installation stays rock-solid for decades. Crafted to meet strict global standards, these bolts offer peace of mind through exceptional durability, optimum density, and a rust-resistant profile that prevents structural weakening over time. Available Sizes: • 8mm x 100mm • 8mm x 125mm • 8mm x 150mm • 10mm x 100mm • 10mm x 125mm • 10mm x 150mm

• Drywall & Cladding Systems: Safely securing metal frameworks for exterior cladding, fibre cement boards, and calcium silicate boards. • Overhead Installations: Perfect for heavy-duty false ceilings and suspended duct coverings, offering superior pull-out resistance. • Flooring & Partitions: Anchoring track structures for mezzanine flooring and interior wall partitions. • General Masonry Fastening: High-performance fixing in concrete, solid brick, and natural stone for both residential and commercial spaces.

1. Drill the Hole: Using a masonry drill bit matching the bolt’s diameter (8mm or 10mm), drill a hole into the base material to the recommended depth (slightly deeper than the bolt length). 2. Clean the Debris: For maximum grip, thoroughly clean the hole using a blowout pump or vacuum to remove all dust and loose particles. 3. Insert the Anchor: Gently tap the GREMAH Heavy-Duty Anchor Bolt into the hole using a hammer until the washer and nut are flush with the surface of the fixture. 4. Tighten and Secure: Using a wrench, tighten the nut to the specified torque. As you turn, the internal mechanism expands, wedging itself tightly against the base material for a permanent, high-strength hold.